Description
Power amplifiers for jammer drones are illegal and dangerous devices （We do not accept orders from the US without authorization&opWe do not accept orders from US without authorization that increase the power output of radio frequency signals to interfere with the communication and navigation systems of unmanned aerial vehicles (UAVs) or drones.
Jamming drones can cause them to lose their GPS signal, become uncontrollable, or even crash, potentially causing injury or death. We strongly advise against using any type of jamming equipment.
GPS L2 is a frequency used by the Global Positioning System (GPS) for civilian purposes. The frequency is 1227.60 MHz, and it is used for navigation, positioning, and timing signals. The signals are in the form of spread spectrum codes and are broadcast in both the C/A (coarse/acquisition) code and the P (precision) code. The P code is encrypted by the U.S. military and is not available to the public. The C/A code is available to the public and can be used to access navigation and timing signals.
|
No. |
Item |
Requirements |
|
|
1 |
Frequency Range |
1227.60 MHz+-10M |
|
|
2 |
Max Pout |
47dBm±0.5dB |
|
|
3 |
Pin range |
5-10dBm |
|
|
4 |
Gain |
>45dB±1.5dB |
|
|
5 |
Gain Adjust |
31dB,1dB Step |
|
|
6 |
IN/OUT VSWR |
≤1.5 |
|
|
7 |
IN/OUT Impedance |
50 Ohm |
|
|
8 |
Working Voltage |
28VDC±1V |
|
|
9 |
Working Current |
<5.5A |
|
|
10 |
RF IN/OUT Ports |
SMA – Female |
|
|
11 |
Dimension |
180*90*25mm (Exclusive Connector) |
|
|
12 |
Power Supply Port |
Pull-core Capacitor |
|
|
13 |
Working Temperature |
-25—-+65℃ |
|
|
14 |
Protection |
Shutdown more than 75℃, auto-restart less than 50℃ |
|
|
Shutdown when reversed power is more than 15W, auto-restart after the 30s |
|||
|
15 |
I/O Port |
DB15 Female (Standard) |
PIN1: 1dB (Hang in air or add 5V: No ATT; Grounding: Enable ATT) |
|
PIN2: 2dB (Hang in air or add 5V: No ATT; Grounding: Enable ATT) |
|||
|
PIN3: 4dB (Hang in air or add 5V: No ATT; Grounding: Enable ATT) |
|||
|
PIN4: 8dB (Hang in air or add 5V: No ATT; Grounding: Enable ATT) |
|||
|
PIN5:16dB (Hang in air or add 5V: No ATT; Grounding: Enable ATT) |
|||
|
PIN7: Pr(Reversed RF Power, Max:1.5-2V,0.05V/dB,10dB range) |
|||
|
PIN10: Pf(Forward RF Power, Max:1.5-2V, 0.05V/dB, 20dB rang) |
|||
|
PIN11: EN (5V: PA OFF; Hang in air or grounding: PA ON) |
|||
|
PIN14: TV(Temperature Indicator :0.01V/1℃) |
|||
|
PIN15: GND |
|||
|
PIN6, PIN8, PIN9, PIN12, PIN13: NC |
|||
|
DB9 Male RS485(Optional) |
PIN1,PIN2: RS485A; PIN3,PIN4: RS485B; PIN5: GND |
||
Reviews
There are no reviews yet.