Description
A power amplifier for a jammer is a device that amplifies the signal of a jammer. It is used to increase the range and power of the jammer, allowing it to cover a larger area and effectively disrupt communication. Power amplifiers are often used in jamming applications, as they can provide a secure connection and reduce interference from other devices. They are also a popular choice for many applications, as they are reliable and can provide a strong, secure connection.
433MHz is a frequency commonly used for UAVs (Unmanned Aerial Vehicles). It is a frequency in the UHF (ultra–high frequency) range and is used to control and communicate with the UAV. It is a reliable frequency for UAVs, as it is less likely to be interfered with by other devices, and can provide a secure connection. 433MHz is the most common frequency used for UAVs, and is a popular choice for many applications.
|
No. |
Item |
Requirements |
|
|
1 |
Frequency Range |
400-470Mhz | |
|
2 |
Max Pout |
47dBm±0.5dB |
|
|
3 |
Pin range |
5-10dBm |
|
|
4 |
Gain |
>45dB±1.5dB |
|
|
5 |
Gain Adjust |
31dB,1dB Step |
|
|
6 |
IN/OUT VSWR |
≤1.5 |
|
|
7 |
IN/OUT Impedance |
50 Ohm |
|
|
8 |
Working Voltage |
28VDC±1V |
|
|
9 |
Working Current |
<5.5A |
|
|
10 |
RF IN/OUT Ports |
SMA – Female |
|
|
11 |
Dimension |
180*90*25mm (Exclusive Connector) |
|
|
12 |
Power Supply Port |
Pull-core Capacitor |
|
|
13 |
Working Temperature |
-25—-+65℃ |
|
|
14 |
Protection |
Shutdown more than 75℃, auto-restart less than 50℃ |
|
|
Shutdown when reversed power is more than 15W, auto-restart after the 30s |
|||
|
15 |
I/O Port |
DB15 Female (Standard) |
PIN1: 1dB (Hang in air or add 5V: No ATT; Grounding: Enable ATT) |
|
PIN2: 2dB (Hang in air or add 5V: No ATT; Grounding: Enable ATT) |
|||
|
PIN3: 4dB (Hang in air or add 5V: No ATT; Grounding: Enable ATT) |
|||
|
PIN4: 8dB (Hang in air or add 5V: No ATT; Grounding: Enable ATT) |
|||
|
PIN5:16dB (Hang in air or add 5V: No ATT; Grounding: Enable ATT) |
|||
|
PIN7: Pr(Reversed RF Power, Max:1.5-2V,0.05V/dB,10dB range) |
|||
|
PIN10: Pf(Forward RF Power, Max:1.5-2V, 0.05V/dB, 20dB rang) |
|||
|
PIN11: EN (5V: PA OFF; Hang in air or grounding: PA ON) |
|||
|
PIN14: TV(Temperature Indicator :0.01V/1℃) |
|||
|
PIN15: GND |
|||
|
PIN6, PIN8, PIN9, PIN12, PIN13: NC |
|||
|
DB9 Male RS485(Optional) |
PIN1,PIN2: RS485A; PIN3,PIN4: RS485B; PIN5: GND |
||
Reviews
There are no reviews yet.